Diagnostic Screen / Start up Screen

Diagnostic Screen / Start up Screen

     When you start up your new Proteus hardware for the first time it will bring you to the Diagnostic Page.

·      Note: Any configuration done through Initial Setup can be changed later.

The Diagnostic Page is the first screen you will see as Proteus comes online and/or by clicking on Communication Status Bar.  Here you can check serial number, software version, and connection status’ (If calling customer support, be on this page for the quickest service.

·      Status on the Diagnostic Page and Communication Status Bar

o   Green: Actively receiving data

o   Orange: Has received data since power on, but is not currently receiving data

o   Red: Never received data.

·      Click on Close Diagnostics to go to the home screen


    • Related Articles

    • Home Screen

      Radar Display (Auto Gain/NM Range) · Adjust Gain up (+) or down (-) to meet desired needs on the water. · On compatible RADAR hardware, select Auto to have Proteus Auto-Focus manage your RADAR gain. · Manually adjust Nautical Mile range up (+) or ...

    • User Guide Full Version 1.0

      Disclaimer Warning: Refer to important safety information in the user app guides, product documentation and review all warnings, limitations, and disclaimers before using this product This product is not a substitute for proper training and prudent ...

    • My Vessel

      Dimensions In the Dimensions tab you can customize Proteus with the exact dimensions of your vessel · Note: Press the (+) or (-) button to move in 6-inch increments or hold own to move through the numbers at a faster pace. GPS and Compass In the GPS ...

    • Troubleshooting (Garmin Multi-functional Display)

      My Proteus screen is going on/off every 10 seconds? If you are experiencing the Proteus screen flashing on and off roughly every 5, 10 (default), 30 seconds, or consistent interval. Check the the HDMI source on your video app. If it is set to ...

    • Accessing your Proteus from your Garmin Display (MFD)

      Proteus displays its feed through the video app. From the Home page on your Garmin MFD locate the Video App and press the button. From there you will see Proteus come online. · Note: If Proteus does not power on automatically o Press the “Home Icon” ...